Problems in the selection of CNC systems

Counts：4432022-11-18 21:25:16　Source: 聊城市大地数控工程公司,CK6125系列数控机床,CK630系列数控机床,CK6150系列数控机床,CK6136系列数控机床,CK6132系列数控机床,CK6140系列数控机床,特种机床改造,仪表系列数控机床

1. The function selection is not suitable Either the function of the selected system is far more than the function required by the modified machine tool, or some necessary system functions are not purchased, the former will cause cost waste, the latter will cause a shortage of functions, affecting the use of other functions and purchasing at the time.
2. The system grade does not match the machine tool grade. This results in the waste of system functions or the excellent performance of the machine tool cannot be played.
3. The varieties and brands of CNC systems, motors and drives are too mixed, and there will be input/output signal mismatch when linking various components and the phenomenon after the signal is generated in transmission. Such as the hysteresis of the motor commutation signal. The key to solving these problems lies in the precision, structure, performance requirements and price of the machine tool itself. Rotate the right CNC system to avoid the weaknesses
4. The setting of numerical control system parameters is as comprehensive as possible, and the parameters related to accuracy must be carefully measured and entered into the system